NEO FOLLOWER 35ST User Manual Download Page 5

P. 5

 - Neo Follower 35ST

4. GENERAL GUIDELINES 

Important safety warns

This device has left the factory in perfect condition. 

In order to maintain this condition and to ensure 

a safe operation, it is absolutely necessary for the 

user to follow the safety instructions and warning 

notes written in this user manual.

Important:

  Damages caused by the disregard of 

this user manual are not subject to warranty. The 

dealer will not accept liability for any resulting de-

fects or problems. 

•  If the device has been exposed to temperature 

changes due to environmental changes, do not 

switch it on immediately. The arising condensa

-

tion could damage the device. Leave the device 

switched off until it has reached room temper

-

ature. 

• 

This device falls under protection-class I. There

-

fore it is essential that the device be earthed. If 

protection screen,lens or ultraviolet screen in 

the fixture is apparently damaged or is dam

-

aged to exceed their own effective degree, such 

as cracked and gashed, it must be replaced. 

•  The electric connection must carry out by qual-

ified person. 

•  Make sure that the available voltage is not high-

er than stated at the end of this manual. 

•  Make sure the power cord is never crimped or 

damaged by sharp edges. If this would be the 

case, replacement of the cable must be done by 

an authorized dealer. 

•  Always disconnect from the mains, when the 

device is not in use or before cleaning it. Only 

handle the power cord by the plug. Never pull 

out the plug by tugging the power cord. 

•  During initial start-up some smoke or smell 

may arise. This is a normal process and does 

not necessarily mean that the device is defec-

tive, it should decrease gradually. 

• 

Please don’t project the beam onto combus

-

tible substances. 

• 

If the external flexible cable or cord of this 

luminaire is damaged, it shall be exclusively 

replaced by the manufacturer or his service 

agent or a similar qualified person in order to 

avoid a hazard.  

Please be aware that damages caused by manu-

al modifications to the device are not subject to 

warranty. Keep away from children and non-pro

-

fessionals.

General guidelines

• 

This device is a lighting effect for professional 

use on stages, in discotheques, theatres, etc., 

the device was designed for indoor use only. 

• 

This fixture is only allowed to be operated with 

the max alternating current which stated in the 

technical specifications in the last page of this 

manual.  

• 

Lighting effects are not designed for permanent 

operation. Consistent operation breaks may 

ensure that the device will serve you for a long 

time without defects. Do not shake the device. 

Be careful with operations. With a dangerous voltaje 

you can suffer a dangerous electric shock when 

touching wires!

CAUTION!

Never touch the device during operation!

The housing mat heat up.

CAUTION!

Never look directly into the light source, as sensitive 

persons may suffer an epileptic shock.

CAUTION!

English version

Summary of Contents for FOLLOWER 35ST


















Reviews: