manualshive.com logo in svg

NEO AVM-3901-B, Installation And Operation Manual, Page: 6 / 82

Share
Download
NEO AVM-3901-B Installation And Operation Manual Download Page 6

iv

AVM-3901-B, -C, -B4, and -C4 Installation and Operation Manual

 

Contents

Setting Jumpers  ..................................................................................... 13
Audio Tracking Pairs  ............................................................................ 14
Upgrading AVM-3901-B, -C, -B4, and -C4 Firmware ......................... 15

Upgrading the Firmware (Discovery Method) ............................... 15
Upgrading the Firmware (Drag-and-Drop Method)  ...................... 17

Correcting a Failed Upgrading Procedure ............................................. 19

Setting the Module to Fail-Safe Loader Mode ............................... 19
Upgrading the Firmware in Fail-Safe Mode  .................................. 19
Rebooting the Module .................................................................... 21

Chapter 3: Operation

Overview ............................................................................................... 23
Operational Notes .................................................................................. 24
PCM and Non-PCM Processing ............................................................ 25

PCM Processing ............................................................................. 26
Non-PCM Processing ..................................................................... 27

Cross-Functional Parameter Changes  ................................................... 28

Audio Parameters ........................................................................... 28
Frame Synchronization Function (FSFunction) ............................. 29
Frame Synchronization Mode (FSMode)  ...................................... 29
SDI Input Video Standard (SdiStdSet)  .......................................... 30

Navigating the Operator and All Lists  .................................................. 31
Operator and All List Parameters .......................................................... 32
Setup Parameters  ................................................................................... 39
Alarms ................................................................................................... 40

Alarm Synchronization  .................................................................. 40
Identifying the Cause of an Alarm ................................................. 40
Enabling or Disabling an Alarm Parameter  ................................... 41
Restoring Default Settings  ............................................................. 41

State Recovery Parameter Availability  ................................................. 42
LEDs and Module Indicators  ................................................................ 43

General Information ....................................................................... 43
Card-Edge LED Locations ............................................................. 44
LED Descriptions ........................................................................... 45
Module Indicator Descriptions ....................................................... 46

Chapter 4: Specifications

Overview ............................................................................................... 47
Input ...................................................................................................... 48

Summary of Contents for AVM-3901-B



















































































Reviews:

No comments