- 10 of 18 –
neo.
cortec
.
Once the packet has been enqueued in the NEOCORTEC module, there will be no
messaging back to the application layer indicating if the transmission to the destination
was successful.
Send Acknowledged Packet:
Similar to the above mentioned command, this command initiates the transmission of
application payload data to another NEOCORTEC module inside the NEOCORTEC
network. The difference is that the payload data is transmitted with end-to-end
acknowledge enabled. This means that once the application payload data is received at
the destination, an acknowledge message is transmitted back. When the Ack or NAK is
received, a corresponding Application code will be transmitted from the NEOCORTEC
module to the external controller (see next chapter).
API_WES_CMD:
This command controls the Wireless Encrypted Setup functionality in a Node who is
announcing a network, or a node who wants to start looking for a new network to join.
There are 3 arguments in the command, which has different functionality:
API_WES_SETUP_RESPONSE:
When a “API_WES_SETUP_REQUEST” has been received from a Node who is trying to
join the network, the application layer can add the node to the network using this
command. The arguments to the command is the Node ID which the joining Node shall
be configured with, and the UID of the joining Node (as given by the
API_WES_SETUP_REQUEST).
Argument Meaning
0x00
Stop WES
0x01
Start WES server
0x02
Request WES status
