Neo Chair H-PAC Assembly Instruction Download Page 2

Page: 2 / 3

Instructions

STEP 1.

Instructions

STEP 2.

Secure with

bolts.

Make sure to fully tighten all 10 bolts.

Insert each

wheel

into the

base leg

while

the base is still upside down.

Turn the base over.

BASE BOLT

Insert the base legs into the central base

so that the bolt holes are aligned and facing up.

For proper alignment:

Slightly under-tighten

the armrest bolts until all

eight (8) of them are in place.

Place the seat on top of the box

with the bottom side up.

Line up the armrest to the seat and loosely

tighten with two bolts. Repeat on the other side.

Line up the back with the armrest and loosely

tighten with two bolts. Repeat on the other side.

Insert the gas lift cylinder.

ARMREST BOLT

Summary of Contents for H-PAC

Page 1: ...edge Failure to follow these warnings may cause serious injury DO NOT use the chair unless all bolts screws and knobs are tight DO NOT use the chair if only components are missing or damaged DO NOT st...

Page 2: ...ase so that the bolt holes are aligned and facing up For proper alignment Slightly under tighten the armrest bolts until all eight 8 of them are in place Place the seat on top of the box with the bott...

Page 3: ...s for better durability Right hand 9 10 11 Once all of the armrests bolts are in place fully tighten each bolt into place Put control mechanism at the bottom of the seat nd the front sticker and tight...