neno primo, User Manual

Page: 2 / 6

10
3. DESCRIPTION OF MODES
S mula on mode
:
L1 - 5 kPa; L2 - 12 kPa; L3 - 17 kPa; L4 - 21 kPa ; L5 - 25 kPa ;
:
Expression mode
L1 - 21 kPa; L2 - 24 kPa; L3 - 27 kPa; L4 - 31 kPa ; L5 - 37 kPa ; L6 - 40 kPa ;
L7 - 42 kPa; L8 - 43 kPa; L9 - 45 kPa;
Allowable difference is ± 5 kpa
4. DESCRIPTION OF ICONS AND BUTTONS
1. Power bu on:
Hold for 2 seconds to turn the breast pump on or off.
2. Mode change:
Press the bu on to change the mode. The device will automa cally switch from s mula on to
expression mode a er 2 minutes. The device can save se ngs and has a me counter. When you
turn on the device, the se ngs from the previous use of the device are automa cally turned on.
The breast pump will automa cally turn off a er 30 minutes of use.
3. Suc on power:
+ increases suc on power; - reduc on of suc on power ( s mula on mode: L1-L 5 ;
e xpression mode: L1-L9) .
4. Ba ery status:
Indicates the amount of ba ery power remaining. Charge the breast pump if the ba ery is low.
5. Session dura on:
Indicates how long you have been using the breast pump. The device will turn off automa cally a er
30 minutes of use.
E- Suc on increase
F- Suc on level
G- Expression mode
H- Session Dura on
See - Figure 2 on page 2
A- Suc on decrease
B- S mula on mode
C- Ba ery Percent
D- Power bu on/ mode change
5. BEFORE FIRST USE
6. CLEANING
Cleaning and sani zing are two different ac vi es. They must be done separately to protect
your child and ensure that the breast pump works properly.
Cleaning - w ashing the surface of the device and removing dirt.
Sani zing - killing organisms such as bacteria or viruses that may be present on the surface
of the device.
See - Figure 3 on page 2
1. Remove the cap from the breast shield before each use.
2. Pull down on valve toremove from connector.
3. Separate the connectorfrom the suc on bowl and suc on cap