neno BIANCO, User Manual

Page: 13 / 88

13
2. Funnel (diameter 24 mm) x2, Funnel (diameter 21 mm) x2
3. Connector x2
4. Gasket cover x2
5. Diaphragm x2
6. Valve x4
7. Milk bottle x2
8. Bottle teat set x2
9. Bottle holder x2
10. USB charging cable
11. Pumping device
12. Tube
13. Bottle lid x2
14. Hands-free breast pump bra
03. DISPLAY ICONS
FIG. 2
A. Power button (1) - Hold down the button for 2 seconds to turn the unit on or
off. Press once to pause.
B. Mode Change Button (2) - Press the button to change the operating mode
of the unit. There are 3 modes of the unit available (stimulation, collection,
milking). The unit will automatically switch from stimulation mode to
milk-out mode after 2 minutes.
C. Changing the suction level - Press „+” (3) to increase the suction or „-” (4) to
decrease the suction. Stimulation mode (5): levels L1-L9; Extraction mode
(6): levels L1-L9; Milk delivery mode (7): levels L1-L9.
D. Battery status (8) - The battery icon shows the battery charge status. Connect
the device to charge when the battery is close to empty.
E. Device operating time (9) - the indicator shows how many minutes have
passed since the breast pump was switched on. The device automatically
switches off after 30 minutes.
F. Suction level (10) - Shows the currently selected suction power level.
04. BEFORE FIRST USE
Check that the kit is complete before starting work.
1. Connect the breast pump to the power supply. Charge the device battery
for 2 hours.
2. Disconnect any parts of the breast pump that come into direct contact with
the breast or milk (See figure 3)
3. Unscrew the milk bottle from the joint.
4. Pull the valve down to disconnect it from the joint.
5. Remove the lid from the funnel and pull the funnel off the joint.
6. Remove the cover and membrane from the joint.