•
Install the product indoors in a dry environment.
•
Do not use the product if the plug is damaged or if the projector has fallen.
11. Technical information
Power supply: 9V AC 6W
Size: 20 x 20 x 20 cm
Weight: 889 grams
12. Installation
1. Choose a suitable location for the projector so that no one will trip over the power cable, pull it or
come into contact with hot surfaces. If an extension cord is required, provide a cord with a current
at least equal to that of the appliance. Otherwise, the appliance may overheat.
2. Place the projector on the table stand (foam ring).
3. Install the included effect wheel. This works with a magnet - the slider on the left side of the
magnetic adapter should be at the top , as shown in the image. Place the magnetic wheel on the
magnetic adapter on the projector. To remove the wheel, you can lift the wheel.
4. To use the standard effect wheels with this projector, the magnetic adapter must first be removed
from the projector. To do this, use a small allen key and place it in the hole at the top of the
magnetic adapter. Turn the allen key counterclockwise to release the adapter from the projector
