9. Installation
The bubble unit can only be used indoors.
Make sure that the bubble unit cannot be knocked over. We advise the use of a collar.
Fill the tube to a maximum of 40 mm from the top edge.
Pay attention!
When filling, no water must escape under the tube.
The Plexiglas tube may only be cleaned with a damp cloth (do not use any cleaning agent!)
Due to evaporation of the water, it is normal to refill the tube regularly.
Over time, the water may become cloudy, empty the entire tube, clean it thoroughly and refill.
Airflow regulation
There is a button on the back of the bubble unit, with this button the air volume can be determined.
To reduce the bubbles, turn the knob clockwise. To increase the bubbles, turn counterclockwise. If
you want to switch off the bubble unit for a longer period, turn this knob off completely.
10. Solving potential problems
Despite careful assembly and checking, it is possible that the bubble unit is not watertight. Before
use, check the bubble unit for damage. The bubble unit may only be used under supervision. Check
regularly that no water is running out of the bubble unit or behind the non-return valve.
The manufacturer is not liable for any water damage caused by the bubble unit.
11. Related Products (To be ordered separately)
NENKO interactive switch panel - 22009
In combination with the use of the Nenko wireless switch panel, you
control the color in the room and control the bubbles of the bubble unit.
Make the Nenko bubble units, LED light tubes, light source for fiber mist,
depth mirror, LED light bulb and LED strips interactive by means of this switch panel.
For more information, please visit our website www.nenko.com.