STROBE LIGHT Z2 RELAY FUNCTION
0 0 2 _ *#
Selects between zone 2 strobe light, or unit on/off indication.
? = 0 (zone 2 strobe light) or 1 (unit on/off indication)
Factory default value is
0020*#
(zone 2 strobe light only)
The Z2 strobe light relay can be assigned to be active when an alarm is triggered on zone
2 only (0), or to indicate when the unit is on (1). Both zone 1 and zone 2 need to be active
for the relay to indicate that the unit is on.
SIREN RELAY FUNCTION
0 0 3 _ * #
Selects between gate alarm, unit on/off indication, or service alarm, when in ALARM
SENSOR MODE only.
? = 0 (gate alarm) or 1 (unit on/off indication), or 2 (service alarm)
Factory default value is
0030*#
(gate alarm)
The siren relay can be assigned to be active when a gate alarm occurs (0), or to indicate
when the unit is on (1), or to activate on service alarm (2). Both zone 1 and zone 2 need
to be active for the relay to indicate that the unit is on.
STROBE RELAY FUNCTION SENSOR ALARM MODE
0 0 7 _ * #
Selects between gate alarm, unit on/off indication, or service alarm, when in ALARM
SENSOR MODE only.
? = 0 (gate alarm) or 1 (unit on/off indication), or 2 (service alarm)
Factory default value is
0030*#
(gate alarm)
The siren relay can be assigned to be active when a gate alarm occurs (0), or to indicate
when the unit is on (1), or to activate on service alarm (2). Both zone 1 and zone 2 need
to be active for the relay to indicate that the unit is on.
Programmable options
20
?
?
