13
Pressurizing the Nemo Hull Cleaner Electric Brush for
Underwater Use
Your hull cleaner electric brush can be used in-water, and can be
submerged and used underwater at depths of up to 50m (164ft).
Before submerging the hull cleaner electric brush to any depth
greater than 10m (32.8ft), it must be pressurized.
1.
Remove the red cap from the pressure valve on the foot of the
hull cleaner electric brush.
2.
Attach a pump, such as the hand pump supplied with the hull
cleaner electric brush, to the valve.
3.
Pressurize the hull cleaner electric brush according to the
depth to which you are going to submerge it, as follows:
Depth
Pressure
Up to 5m
Minimum 1 Bar
Up to 10m
Minimum 2 Bars
Up to 20m
Minimum 3 Bars
Up to 30m
Minimum 4 Bars
Up to 40m
Minimum 5 Bars
Up to 50m
Maximum 6 Bars
Caution: Never add more than 6 Bars of pressure to the
hull cleaner electric brush.
Caution: Under no circumstances should the hull
cleaner electric brush be pressurized underwater.
Pressurizing the tool underwater will cause the tool to
burn out.