5
I
I
N
N
S
S
T
T
A
A
L
L
L
L
A
A
T
T
I
I
O
O
N
N
Your automatic pool cleaner is designed to work in a wide variety of swimming pools.
There are items that may or may not be needed to be installed for your cleaner to function
properly. All installations are covered in this manual. Find which type of installation
matches your pool configuration and follow the instructions carefully.
For the cleaner to work properly, regardless of the installation type, the hose needs to be
completely primed. The easiest method of priming the hose is to simply put the end of the
hose up to your pools return fitting (eyeball) with the pump running. The pump will force
water through the hose and purge all of the air out. Keep the pump running until there are
no air bubbles coming out the opposite side.
Once fully assembled,
your Automatic Pool Cleaner
should look like this.......
O
O
P
P
T
T
I
I
O
O
N
N
1
1
This is the most common type of installation.
This type of skimmer is provided with a vacuum
plate that fits over the skimmer basket. The plate
has an elbow. Place the end of the Automatic
regulator valve over the elbow. Make sure that the
bypass post on the valve is facing down.
SKIMMER VACUUM PLATE
O
O
P
P
T
T
I
I
O
O
N
N
2
2
The skimmer provides a vacuum port in the
skimmer face plate below the skimmer opening.
With this type of skimmer simply insert the end
of the automatic regulator valve into the vacuum
port.
SKIMMER VACUUM PORT
O
O
P
P
T
T
I
I
O
O
N
N
3
3
For skimmers that do not use a vacuum plate.
Attach the end of the automatic regulator valve
into the 2” hose cone. The 2” hose cone is then
inserted into the bottom of the skimmer
NOTE
Make sure the cone fits snugly inside the
bottom of the skimmer.
INSIDE SKIMMER OUTLET
Automatic Flow
Contr ol Valve
Hose
Adaptor
