Charging the Batteries
The Li-ion batteries are supplied partially charged, and must be
charged to full capacity before using the floodlight for the first time.
When the batteries are fully charged, the floodlight can run at the
highest intensity for up to one hour.
Caution: Use only a Li-ion battery from the original
factory with the voltage listed on the nameplate of your
floodlight. Using other batteries not suitable for the
floodlight can lead to malfunctions, cause damage to
the floodlight, and pose a fire hazard.
Danger: Ensure that the power supply voltage
corresponds with the data on the nameplate of the
battery charger.
Danger: Only use the charger in a dry environment. The
charger is not waterproof. Never attempt to charge the
batteries under water.
The batteries can be charged at any time without reducing their
service life. The battery charger detects the charging condition of
the batteries, and charges them with the optimum current.
Interrupting the charging procedure does not damage the batteries.
1.
Connect the mains plug of the battery charger to an electrical
outlet. A steady green light on the battery charger indicates
that the charger is ready for operation.
2.
Press the battery charger’s connector into the socket on the
top of the battery pack. There is only one way to insert the
connector into the battery socket.
7
