NEMIQ NTCS Series, Operation Manual

Page: 7 / 12

OPERATION MANUAL
7
1.16. Cutter Back: Refers to the blade cutting into a certain depth and
retreating to a certain size to avoid the core wire being scratched. The size
of the retreat is determined according to the thickness of the wire rubber.
The thicker the rubber is, the larger the retreat is. ~ 5.0mm.
1.17. Set Count: refers to the total output of set work. The input data
cannot be less than the quantitative input data. If the data is less than the
quantitative data, the machine will not work.
1.18. Finished: cumulative production quantity.
1.19. Set Batch: how many parameters the machine operates and how
many times the machine automatically stops. If you enter 100 machines
to 100 times, it will automatically stop. Enter 0 for no quantitative data,
the machine will not automatically stop, and the data will reach the set
total amount. Downtime.
1.20. Batch Delay: When the machine reaches the specified amount, how
many seconds will it delay, and it will start automatically and continue to
run.