Page 1-2: StrikForce Users
Page 3: Non-StrikForce Users
2
(
Wireless Power Module Plug)
(In
Power Module)
Hide Away the Plug, but get the same function!!
Plug in the plug to the Power
Module. The Power Module is located under the seat pan.
(Wired to joystick Power Module Plug)
(In the joystick... 3mm end)
Plug in the bigger plug to the Power Module. The Power Module is located under the seat
pan. After that, take the other end and direct yourself to the underneath part of the joystick or
Omni Display. Remove one the two caps and plug in the jack like seen above.
If the user is in trouble:
4.
Push the button on the keyfob.
** This will power off the chair and stop the chair from moving.
5.
When you are comfortable and ready/able to drive properly again, turn the power
back on again.
**Make sure the joystick is centered before the chair is turned on again.
