Page | 5
P: 419.542.7751 F: 419.5426690 800.782.761 nemcofoodequip.com
Operating Instructions
1.
Plug the unit in to the appropriate power outlet. The display will show a single red dot
when voltage is present.
2.
Press the round power on/off button. The display will show ‘0’ and the unit is now in
the ready state.
3.
Place an appropriate pan on the glass cooktop, centering it on the target.
4.
Press the Power Up ‘ʌ’ button. The display will show ‘5’, and the fan will start. The
range is now warming or cooking at power level 5.
5.
Press the Power UP ‘ʌ’ button to increase the power setting.
6.
Press the Power Down button ‘v’ to decrease the power level.
7.
Warming Units:
(9100-1, 9100): The power will adjust from 1 to 7. See chart for approximate holding
temperatures.
Cooking units:
9110, the power will adjust from 1 to 9.
9110-1, the power will adjust from 1 to 8.
9111-1, the power will adjust from 1 to 9.
8.
While cooking or warming, press the Power On/Off button to stop the cooking cycle, or
remove the pan.
If the pan is removed and replaced within approximately 40 seconds while the ’U’
symbol is flashing on the display, the system will automatically resume heating at the
previous setting. After 40 seconds with no pan, the display will show ‘0’. Pressing the
Power Up key once will resume operation at the previous setting if the pan is present.
9.
The power level can be adjusted ‘on the fly’ at any time while the unit is heating.
10.
When the unit is turned off using the Power On/Off button, the cooling fan may
continue to operate for a short period of time.
