LOOSE HOODS
*Turn off power and check if hood is loose. Remove light bulb and tighten hood screws as necessary.
UNIT BLOWS FUSE OR CIRCUIT BREAKER
*Check to make sure circuit is not overloaded.
Page 1: ...e turn switch off and remove plug from power source 5 Do not operate any appliance with a damaged cord or plug after the appliance malfunctions has been dropped or damaged 6 This appliance is not intended for wet or moist locations Never locate appliance where it may fall into water 7 Connect to properly grounded outlets only Avoid the use of extension cords Do not run cord under carpeting runners...
Page 2: ...LOOSE HOODS Turn off power and check if hood is loose Remove light bulb and tighten hood screws as necessary UNIT BLOWS FUSE OR CIRCUIT BREAKER Check to make sure circuit is not overloaded ...
