manualshive.com logo in svg

Nembrini Audio MP1 PRO, Manual

Share
Download
Nembrini Audio MP1 PRO Manual Download Page 2

MP1 PRO PROGRAMMABLE TUBE AMPLIFIER

Congratulations on choosing our 

MP1 Pro Programmable Tube Amplifier

. 

The 

Nembrini Audio MP1 Pro

 features a Tri-State Voicing selection that allows you to choose between Distortion 

Tube, Clean Tube, or Solid State virtual circuits. The EQ points were designed to replicate the sound of Fender* and 
Marshall*, but the Presence control surpasses the range offered by either.
•  Unique Tri-State Voicing option for choice of Clean Tube, Distortion Tube, or Solid State circuit.
•  Two 12AX7 virtual tubes.
•  Three programmable gain controls
•  Four band programmable EQ including 16dB boost/cut for bass and treble.

Nembrini Audio have extended the possibility of the original hardware to customize your tone:
• 

Power amplifier section

•  6 guitar effects, delay, modulation, reverb, cleaner, noise gate and compressor.
•  6 carefully selected cabinet emulations
•  4 of the best mic emulations used in real recording sessions - selectable mic positions with volume and pan con-

trols

•  Powerful impulses loader to load your favorite IRs

Summary of Contents for MP1 PRO





















Reviews:

No comments

Brands by name

Popular brands

Load more brands