Nemaxx P6, Original Operating Instructions

Page: 28 / 53

28
Version: 9a
13.11.2018
EN
CLEANING THE GRATE DOOR GLASS
The best way to clean the grate door glass is using a damp cloth with small amount of ash from the
firebox.
Stubborn dirt can be removed using a special cleaner that can be purchased from your
specialist stove dealer.
CLEANING THE FLUE GAS PASSAGE WAYS
Cleaning the flue passageways should be done at least once a year.
Burning high ash pellets may require this cleaning to be done more often.
Insert a cleaning brush in the openings to loosen any ash buildup and use a vacuum cleaner to
remove the loosened ash.
Clean these passageways only when the stove and ash are cold.
Do not start a fire in the vacuum cleaner by vacuuming up hot ash.
Side panels are located on both sides of the stove (A) (see the following picture) that can be
removed by unscrewing the two 5/32’’ allen head screws.
Reinstall the covers when cleaning is complete.
Loosen the top cover plate (B) (For models P9 and P12, remove the hot air guide (C) as shown below).
There are two further access openings above the combustion chamber.
Loosen the two 5/32’’ allen head screws shown as (D) (in the drawing below).
Rotate the covers over the access holes and use a brush and vacuum to clean the ash.
Rotate the covers back over the holes and tighten the screws.
HOW TO CLEAN THE STOVE
A
B
C
D
D
D