STEP 1.
Remove the bottom-left pre-installed M6 x 16mm Hex Cap Screw.
STEP 2.
Install bracket on MR luminaire as shown using supplied M6 x 20mm
Hex Cap Screw. Torque M6 x 20mm Hex Cap Screw to 40 in-lbs (4.5
Nm). It is strongly recommended that a medium or high strength
thread-locker be used when installing the bracket. For units using
surface or suspension mounting, install safety kit hardware on top of
the surface mount or suspension mount brackets in the same location
as shown.
STEP 3.
Attach stainless steel chain to safety kit bracket using stainless steel
oval shaped threaded connecting link.
STEP 4.
Attach loose end of chain. Secondary safety mounting point must be
suitable for supporting a minimum of 50lbs:
- Attach loose end of stainless steel chain to fixed eye-bolt (not
supplied) using the second stainless steel oval shaped thread-
ed connecting link.
- Alternate attachment method: Wrap loose end of chain
around fixed beam or other immovable support and create a
closed loop using the second stainless steel oval shaped
threaded connecting link. Supporting beam or structure must
form a closed loop to prevent the secondary safety chain from
slipping off or becoming unhooked.
MR-SK-##
PART NAME
QTY
1
1
1
2
1
Secondary Safety Bracket
M6 Flat Washer
M6 x 20mm Hex Cap Screw
Oval Shaped Threaded Connecting Link
Stainless Steel Chain, 1/8” Trade Size
MR-SK-## – SECONDARY SAFETY KIT (Ordered Separately)
This MR-K-## kit is intended for use with UL Listed MR luminaire as
marked on the luminaire nameplate.
Accessory Package Contents
INSTALLATION STEPS
Step 2
Step 1
1
2
3
M6 SCREW
TM
Nemalux
I N D U S T R I A L
MR-GEN
rev. A-15
1-1
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
