52
Trigger Level
：
There are 3 options of Trigger Level , the options “Low” and ”
High” are used for turning on alarm function. “Low” is generally used for
debugging while “High” will be selected to turn on alarm function for on road
use. “Off” means turn off alarm trigger function.
Duration
：
Duration of alarm video recording
Alarm Out-Buzzer
：
Set the Buzzer ON, it would beep for 5 seconds when
alarming.
Alarm Out-Output1
：
Set it ON, 12V level output would come from the alarm
wire of Output 1
Alarm Out-Output2
：
Set it ON, 12V level output would come from the alarm
wire of Output 1
Display
：
A full screen of one channel will display when the channel is
triggered.
Priority
: Set priorities for Alarm1~Alarm4,Reverse,Brake, Left, and Right.
When different types of alarm are triggered at the same time, alarms with the
highest priority will work first.
：
Click, the priority value of the selected alarm will be added by 1. The
bigger the value, the lower the priority
：
Click, the priority value of the selected alarm will be reduced by 1. The
smaller the value, the higher the priority
Alarms with higher priority will be triggered first
1 is the highest priority, and 8 is the lowest.
The diagram above is the default sort of priority
The priority sort of the diagram above is:
Alarm 1>Alarm 2>Alarm 3>Alarm 4>Reverse>Brake>Left>Right
If two alarms A and B are triggered at the same time, and A’s priority is
higher than B’s, A will record first. After A finishes the recording, if B is still