Bathroom Fan with Light
YOU MUST READ AND SAVE THESE INSTRUCTIONS
Please read these instructions carefully before installing,
operating or servicing the fan. Failure to comply with the instructions
contained herein could result in personal injury or property damage.
We recommend that you keep this guide for future reference.
Unpack and carefully remove unit from carton. Refer to the list
of parts to verify that all parts are present.
Description
This fan model uses a low noise fan driven motor. The motor is designed
and manufactured to have an extended service life and operates
very efficiently. There is a cut-off for safety and to extend the service life
of the motor.
Table of contents
Description, safety information and warnings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
List of parts supplied
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3
Specifications and dimensions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Wiring diagram
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Installation I (joist mounting)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5
Installation II (in existing construction)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Maintenance and light bulbs replacement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Limited warranty
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
List of parts supplied
Part name
Appearance
Quantity
Screen and glass shade
1
GU24 9 W LED bulb
2
Long screw
8
Short screw
4
Support bracket I
2
Support bracket II
2
A-1: fan housing
A: fan blower wheel
A1
A
2
Safety information and warnings
1. Electric Service supply must be 120 volts, 60 hertz.
2. Do not install in locations where the air temperature will exceed
40°C (104°F).
3. Do not bend or kink the power wires.
4. Follow all local building, safety and electrical codes as well as NEC
(National Electrical Code) and OSHA (Occupational Safety
and Health Act).
5. Always disconnect the power supply prior to servicing the fan,
motor or junction box.
6. Protect the electrical wires from sharp edges, oil, grease,
hot surfaces, chemicals, or other objects.
7. Do not install the unit in ducts where the airflow can be
severely restricted.
8. There should always be an adequate air supply to the vented area.
9. This ventilating fan is approved for use over a bathtub or shower
when installed in a GFCI (Ground Fault Circuit Interrupter)-protected
circuit. Do not use fan over a bathtub or shower that is not approved
for that application and marked accordingly.
10. For general ventilating use only. Do not use to exhaust hazardous
or explosive materials and vapors.
11. Disconnect the appliance from the power supply before servicing.
12. Do not use this fan with any solid state control device, such as
a remote control, dimmer switch, or certain timers. Mechanical timers
are not solid state devices.
13. This product must properly connect to the grounding conductor
of the supply circuit.
14. Not for use in kitchens.
15. Ducted fans must always be vented to the outdoors. Do not vent
exhaust air in spaces within walls, ceiling, attic, crawl space
or garage.
The housing of ventilation fan: A-1
Fan blower wheel: A
Combine A-1 and A first,
and mount to the ceiling.
