22
Nektar Impact LX49, LX61 & LX88 User Guide www.nektartech.com
Assignment Types (E1)
Most of the controls in the default presets are assigned to MIDI CC messages. But there are several other options and the
below chart shows you which are available for the two types of controls.
To change an assignment type, do the following:
Press the E1 on your keyboard to select Control Assign. The display reads {ASG}
Move or press a control. The type abbreviation you see in the display is the currently assigned type as per above chart
Change the value in decrements/increments using the keys with the -/+ symbols screened above (C3/C#3). The type
change is instant so if you exit the Setup menu after making changes, those changes remain active
Data 1 and Data 2 Values (C#1 & D#1)
The Data 1 and Data 2 functions are required for some controller assignments as per the chart below.
To enter a Data 1 or Data 2 value, do the following:
Press either C#1 or D#1 on your keyboard to select either Data 1 or Data 2. The display reads {d1} or {d2}
Move or press a control. The controls Data 1 or Data 2 value will be visible in the display
Change the value in decrements/increments using the keys with the -/+ symbols screened above (C3/C#3). The value
assignment is instant so if you exit the Setup menu after making changes, those changes remain active
You can also enter a specific value using the white number keys spanning G3–B4 (G4-B5 on LX61). Press Enter (C5) to
accept the change
Controller Type Assignment Type
Display Abbreviations
Pitch bend, Modulation
Wheel, Faders 1-9,
MIDI CC
CC
Pitch Bend
Pbd
Buttons 1-9, Transport
buttons, Foot Switch,
Pads 1-8
MIDI CC Toggle
toG
MIDI CC Trigger/Release
trG
MIDI note
n
MIDI note toggle
nt
MIDI Machine Control
nnc
Controller Type Assignment Type
Data 1
Data2
Pitch bend, Modulation
Wheel, Faders 1-9,
Pots 1-8
MIDI CC
Max value
Min value
Pitch Bend
Max value
Min value
Buttons 1-9, Transport
buttons, Foot Switch,
MIDI CC Toggle
CC value 1
CC vaue 2
MIDI CC Trigger/Release
Trigger value
Release value
MIDI note
Note on velocity
MIDI note #
MIDI Machine Control
n/a
Sub-ID #2