22
13. TROUBLESHOOTING
Possible causes of malfunction during installation or use.
Problem
Possible cause
Solution
Actuator does not work
No electricity at feeder
Check status of circuit breaker
or safety switch
Cable not connected or wire
disconnected.
Check electrical connections
at reduction motor
14. ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials: aluminium, zinc, iron, plastic of
various type, cuprum. Dispose materials in conformity with local regulations about
removal.
15. CERTIFICATE OF GUARANTEE
The manufacturer will guarantee good function of the appliance. The manufacturer
shall undertake to replace defective parts due to poor quality materials or
manufacturing defects in accordance with article 1490 of the Civil Code. The guarantee
covers products and individual parts for
2 years
from the date of purchase. The latter is
valid as long as the purchaser possesses proof of purchase and completion of all
agreed conditions of payment.
Guarantee of good function of appliances agreed by the manufacturer implies that the
latter undertakes to repair or replace free of charge and in the shortest period possible
any parts that break while under warranty.
The purchaser is not entitled to any reimbursement for eventual direct or indirect
damage or other expenses incurred. Attempt to repair by personnel unauthorised by
the manufacture shall render the warranty null and invalid.
The warranty does not cover fragile parts or parts subject to natural wear and tear or
corrosion, overload, however temporary etc. The manufacturer will accept no
responsibility for eventual damage incurred by erroneous assembly, manoeuvre or
insertion, excessive stress or inexpert use.
Repairs performed under guarantee are always "
ex factory of the manufacturer
".
Respective transport expenses (out/back) are the responsibility of the purchaser.
34
DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED
MACHINE) AND EC DECLARATION OF CONFORMITY.
Hereby the
Manufacturer:
Nekos Srl
Via Capitoni 7/5- 36064 Mason Vicentino (Vicenza) - Italy
Tel +39 0424 411011 – Email
declare under its own responsibility that the following products:
Product
Designation:
Window chain drive
Type :
230 V : KATO 253 - KATO - KATO 305
KATO SYNCRO
3
- KATO 305 SYNCRO
3
INKA 356 - INKA 356 SYNCRO
3
24 V : KATO 253 - KATO
- KIMO - KATO 305
KATO SYNCRO
3
- KATO 305 SYNCRO
3
INKA 356 - INKA 356 SYNCRO
3
Year of manufacturing from:
2017
Fulfil the essential requirements of the Machinery Directive
2006/42/EC
,
Annex I,
Art. 1.1.2, 1.1.3, 1.1.5, 1.2.1,1.2.3, 1.2.6; 1.3.2, 1.3.4, 1.3.9, 1.5.1, 1.5.2, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.5.10, 1.5.11,
1.7.1, 1.7.1.1, 1.7.3, 1.7.4.2, 1.7.4.3
The relevant technical documentation is compiled in accordance with
Annex VII, Part B
The person authorised to compile the relevant technical documentation is:
ing. Matteo Stefani – Nekos S.r.l.
In response to a reasoned request by the national authorities, we will provide, via e-mail, the relevant information on the
product listed above within an adequate period proportional to its importance.
Furthermore the products listed above complies with the provisions of followings Directives :
2014/30/EU
ElectroMagnetic Compatibility Directive (EMCD)
2014/35/EU
Low Voltage Directive (LVD)
2011/65/EU
Restriction of the use of certain hazardous substances Directive (RoHS Directive)
and of the following harmonised standards and/or technical specifications:
EN 60335-2-103 ; EN 61000-6-3:2007 + A1:2011 ; EN 61000-6-2:2005 + AC:2005
EN 60335-1:2012 + EN 60335-1/A11:2014 ; EN 50581:2012
Commissioning of the complete machinery including the above mentioned drives delivered by us is not allowed until it is
ascertained that the installation of the complete machinery was performed in accordance with the specifications and the
operating and installation advice given in our Mounting Instructions, and that the acceptance procedure was duly carried
out and documented in an acceptance protocol by a specialist.
This is declared by the manufacturer:
NEKOS SRL
- Via Capitoni 7/5 - 36064 Mason Vicentino (Vicenza) - Italy
Represented by:
Giuliano Galliazzo
– President CEO
Place and date:
Mason Vicentino
28/07/2017
Valid signature
