3
size. The Dent Master will also not work on aluminium panels or surfaces.
DENT REPAIR KIT-INSTRUCTIONS FOR USE
TROUBLE SHOOTING:
Ideal operation conditions:
In the shade and with a temperature range from 10-26
0
C
The dent does not come out completely:
It may take up to 10 pulls to achieve the desired result and even then it may not be
100% equalised.
The dent has been pulled more than 10 times and there is still a very small
dent left:
The dent is too sharp for the “Dent Repair Kit”.
Glue stays on the dent pulling tab instead of the car:
This is ok; the glue may stay on the car or the pulling tab.
Large dent repair:
The system can repair dents up to the size of a grapefruit with excellent results:
Simply start at the outer edge of the dent with your “Dent Pulling Tab”.
Follow the steps 1-7 around the outer perimeter of the dent and slowly spiral your
way into the centre of the dent. Imagine a clock face, start at 12,3,6 and so, moving
in a spiral into the centre until the dent is removed.
SYMBOLS
Denotes risk of
personal injury or
damage to the tool
WARNING – To
reduce the risk of
injury, user must
read instruction
manual”
In accordance with
essential safety
standards of
applicable European
directives
Class II- The
machine is double
insulated; Earthing
wire is therefore no
necessary
Mandatory use of
eye protection
Wear noise
protection
WEEE
Do not dispose of
Waste Electrical
& Electronic
Equipment in with
domestic rubbish
