background image

Read & save these instructions and precautions. Read all precautions and instructions before use. 

GENERAL DESCRIPTION 

This Rechargeable Grease Gun is a fully automated, battery powered grease gun developed  for manual 
lubrication of grease points. It  includes a pressure relief valve to expel excessive pressure (8000 psi) in the 
case of a blocked bearing, fitting, or lubrication line. This Rechargeable Grease Gun is driven by a small, 
low voltage electric motor connected to a three-stage planetary gear reducer. The rotary motion of the 
motor is converted into a reciprocating motion of the plunger through an eccentric and yoke mechanism. 
This Rechargeable Grease Gun is a positive displacement single acting pump. 

SPECIFICATIONS 

Cordless Grease Gun 18V 

Maximum Operating Pressure: 551 bar (8000 psi) 

Operating Temperature Range: -18C° to +50C° 

Battery 

18V | 2000mAh | Li-ion 

Battery Charger 

Input:  90-230V~ | 50-60Hz | 45W 
Output: 7.2 - 18V | 1500mA 
Charge Time: 1  -1.5hour

 

Outlet Hose 

Pressure Rating: 689 bar (10,000 psi) 
Hose Length: 700 mm 

PROPER USE 

This Rechargeable Grease Gun was exclusively designed to pump and dispense lubricant using 
configured battery power. The maximum specification ratings should not be exceeded. Any other use not 
in accordance with these instructions will result in loss of claim for warranty or liability. 

EC DECLARATION OF CONFORMITY

We CANNON TOOLS LTD

20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.

Declare that the following machine complies with the appropriate basic safety

and health requirements of the EC Directive based on its design and type, as

brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration

will lose its validity.

Product description: 18V LI-ION CORDLESS GREASE GUN
Model: CT4790

Applicable EC Directives:
EC Low Voltage Directive 2014/35/EU

EC Directive of Electromagnetic Compatibility 2014/30/EU

Harmonized standards

EN 60335-2-29:2009

EN55014-1:2006+A2:2011,EN55014-2:2008

EN61000-3-2:2006+A2:2009,EN61000-3-3:2008

20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director

CANNON TOOLS LTD

2018-03-23

1

Summary of Contents for CT4790









Reviews: