![background image](http://html1.mh-extra.com/html/neilsen/ct4341/ct4341_original-instruction_3876896006.webp)
♦ This appliance is not designed for use by children or people who cannot read or
understand the manual unless they are under the supervision of a responsible
person to ensure that they can use the battery charger safely. Store and use the
battery charger out of the reach of children, and ensure that children cannot play
with the charger.
♦ Connection to the mains supply must be in accordance with the national
regulations for electrical installations.
Connectand disconnectthecharger from a battery. Info
If the battery clamps are incorrectly connected, the reverse polarity protection will
ensure thatthe battery and chargerare not damaged.
For batteries mounted inside a vehicle
1. Connectthe red clamp to the battery's positive pole.
2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and
the battery.
3. Connectthe charger to the wall socket.
4. Disconnect the charger from the wall socket before disconnecting the battery.
5. Disconnectthe blackclamp before the red clamp.
Some vehicles may have positively earthed batteries
1. Connectthe blackclamptothe battery's negative pole.
2. Connectthe red clamp to the vehicle chassis remote from thefuelpipeand the
battery.
3. Connect the charger to the wall socket.
4. Disconnectthe charger from the wall socket before disconnecting the battery.
5. Disconnectthe red clamp before the blackclamp.
SPECIFICATIONS
6A AUTOMATIC BATTERY CHARGER
Model: CT4340
Voltage Input: AC 230V/50Hz
Rated Input Power: 75W
Voltage Output: DC 12V
Charging Current: 4.2A Effective
Battery Capacity: 20-80Ah
Fuse: 7.5A