background image

 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

IMPORTANT INFORMATION  

                                                 

WARNING: The warnings, cautions and instructions

 

discussed in this instruction 

manual cannot cover all

 

possible conditions and situations that may occur. It 

must be

 

understood by the operator that common sense and caution

 

are factors 

which cannot be built into this product, but must

 

be supplied by the operator.

 

 

When using the tool, basic safety precautions should always be followed to

 

reduce the risk of 

personal injury and damage to equipment. 
Read and understand tool labels and operating instructions, safety precautions

 

and warnings 

in this manual before operating or maintaining this nailer. 
Failure to follow warnings could result in 

DEATH

 or 

SERIOUS INJURY

Most accidents that result from the operation and maintenance of nailers are

 

caused by the 

failure to observe basic safety rules or precautions. An accident

 

can often be avoided by 

recognizing a potentially hazardous situation before it

 

occurs and by observing appropriate 

safety procedures. 
Basic safety precautions are outlined in the "

SAFETY

" section of this manual

 

and in the 

sections which contain the operation and maintenance instructions.

 

Hazards that must be 

avoided to prevent bodily injury or tool damage are

 

identified as 

DANGERS

 or 

WARNINGS

 on 

the nailer and in this manual. 
Never allow the nailer to be operated by children or individuals who have not

 

reviewed this 

manual. 

OPERATE THE NAILER ACCORDING TO THIS MANUAL. 
 
 

 

WARNING! 
Always follow the tool manufacturer's safety and

 

maintenance instructions. 
Always wear safety glasses with side shields when

 

operating or servicing tools. 
Always disconnect the air supply from the tool and empty

 

the magazine when servicing tools. 

 
 

 
 
 
 

SAVE THIS MANUAL 

FOR FUTURE REFERENCE! 

 

Summary of Contents for CT4337

















Reviews: