How to use Digital Torque Wrench
3-3
How to select “Unit”.
3-4
How to use Pre-set function.
1.
2.
3.
When you change units the target setting will also be changed to the new units value.
This electronic torque wrench contains 4 unit selections.
(kg-cm, in-lb, ft-lb, N-m).
Note
1.
2.
3.
When you change units the target setting will also be changed to the new units value.
This electronic torque wrench contains 4 unit selections.
(kg-cm, in-lb, ft-lb, N-m).
Note
06
Press “M” and “P/T” button together and release to select different torque units.
To: Increase (+): 1. Press and hold the (+) button to increase the current target value.
2. LCD will show the reading.
3. Press and released "M" button please.
4.The first pre-set value is stored.
1. Press "M" button, the L.C.D panel shows "P01" than "0.0" or another reading.
2. If need to Pre-set another reading, follow the first point please.
3. There 10 sets of reading can stored.
To:
Lower (-): 1. Press and hold the (-) button to lower the current target value.
2. The target will show for 10 seconds.
3. After 10 seconds the LCD display 0.00.
4.The first pre-set value is stored.