Neilsen CT3950, Original Instructions Manual

Page: 9 / 12

7
8. TROUBLESHOOTING
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect
size or type of hose connectors. To remedy check the air supply .
b) Grit or gum deposits in the wrench may also reduce performance. This may be
evident in the air strainer located in the area of the air inlet. Flush the wrench out
with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin. Allow to
dry before use.
9. DISPOSAL
At the end of the machine's working life, or when it can no longer be repaired,
ensure that it is disposed of according to national regulations.
Contact your local authority for details of collection schemes in your area.
In all circumstances:
Do not dispose of this tool with domestic waste.
Do not incinerate.
During decommissioning of the equipment, certain hazards should be understood
and avoided:
. Only with the line pressure released shall the equipment be disassembled.
.Goggles should be worn.
10. SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Wear hearing protection.
Wear safety goggles.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health
and the health of bystanders. Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust
extraction during use.
Wear gloves.