allow you to resist kickback forces.
Kickback forces can be controlled by the
operator, if proper precautions are taken. Do not let go of the chain saw.
−
Do not overreach and do not cut above shoulder height.
This helps prevent
unintended tip contact and enables better control of the chain saw in unexpected
situations.
−
Only use replacement bars and chains specified by the manufacturer.
Incorrect replacement bars and chains may cause chain breakage and/or
kickback.
−
Follow the manufacturer’s sharpening and maintenance instructions for
the saw chain.
Decreasing the depth gauge height can lead to increased
kickback.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to safety rules for the
subject product. MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY PACK
1. Before using battery pack, read all instructions and cautionary markings on
(1) battery charger, (2) battery, and (3) product using battery.
2. Do not disassemble battery pack.
3. If operating time has become excessively shorter, stop operating
immediately. It may result in a risk of overheating, possible burns and even
an explosion.
4. If electrolyte gets into your eyes, rinse them out with clear water and seek
medical attention right away. It may result in loss of your eyesight.
5. Do not short the battery pack:
(1) Do not touch the terminals with any conductive material.
11
