8
Applying increased pressure to the Sander does not lead to an increase in the
sanding rate,but instead increases the wear on the sand paper.
Only use the original accessories included in this Sander.
Rough Sanding:
Attach coarse grade sand paper. Apply only light pressure to the Sander so
that it runs at a higher sanding rate, achieving a high rate of removal.
Fine Sanding:
Attach fine grade sand paper. Vary the amount of pressure applied to the
Sander to achieve the best results.
7. CLEANING AND MAINTENANCE
Attention ! Before performing any work on the equipment, pull
the power plug.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.Regularly clean the machine housing with a soft cloth, preferably after
each Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, In the back of this manual you
find an expanded view of the parts that can be ordered.
