8
Dust box
The use of the dust box makes sanding operations clean and dust collection
easy. To attach the dust box, fit the box’s entry port onto the dust spout on the
tool. Make sure that the hole in the box’s entry port is just over the pimple-like
protrusion on the dust spout. For the best results, empty the dust box when it
becomes approximately half full, tapping it lightly to remove as much dust as
possible.
OPERATION:
Sanding operation
CAUTION:
Never run the tool without the abrasive paper. You may seriously damage
the pad.
Never force the tool. Excessive
pressure may decrease the sanding
efficiency, damage the abrasive
paper or shorten tool life.
Hold the tool firmly. Turn the tool on and
wait until it attains full speed. Then gently
place the tool on the workpiece surface.
Keep the pad flush with the workpiece and apply slight pressure on the tool.
8. CLEANING AND MAINTENANCE
Attention ! Before performing any work on the equipment, pull
the power plug.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the
engine. Regularly clean the machine housing with a soft cloth, preferably after
each Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
