22
Only when the machine is damaged, and the threat
to the environment , just allowing the machine in a
short period dragging , also should in the condition
of accelerograph control , hydraulic control
operable .If the conditions not allow , the machine
will be loaded to other vehicles to pul it out to protect
other components from damage.
4.6 Machine Loading and unloading
When machine load to a lower trailer, loading plane
must be firmly
Maximum angle 15
°
Notes: Using the appropriate place.
1
)
Lifting capacity must be consistent with the machine weight at loading
dock.
make sure the inclination of the ramp less thank 15
°
2
)
Driven on the ramp, must ensure that the ramp has sufficient width
and capacity.
In addition, the slope can
’
t be too high to ensure that no sliding down
driving.