5
The motor fails to start
after being powered on
Problems
Causes
1. The power cables come off.
2. The battery is out of power.
3. The power switch as been
1. Dismantle the cover to connect
the cable.
2. Charging
damaged.
3. Replace the switch
Water can not go out
Filter maybe clogged
Open the bottle and take out the
filter to clean it
Maintenance of equipment:
Troubles shooting:
1. Please recharge after use if no power inside.
2. Clean the machine by water.
3. Put the machine in a cool and dry place.
SAFETY INSTRUCTIONS
each of children.
ind blowing the spray away from
you.
under 40
℃
. before each use.
to the chemical supplier safety instructions or contact the poisons information centre or
ed in direct sunlight.
doctor immediately.
Not to be usded to spray solvents ,chemical,or flammable liquids.
Must put clean water in tank to spray several mintues after usage to avoid any residue on pump
and other important parts.
Cannon Tools Limited
Address
:
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
