7
STEP 6: 1.
Attach two Braces (each at one side) to the middle of Support Rod by using Hex Bolt M6x45
and Nylon Lock Nut M6, don't screw them up temporarily.
2.
Connect another end of two Braces at each side of Hitch Tongue with the hole in horizontal direction at the
round part of Mounting Tube by using Hex Bolt M6x35 and Nylon Lock Nut M6.
3.
Now tighten all bolts and nuts.
STEP 7: 1.
Insert the head of Axle on Frame Tube Assembly into the Swivel Bushing at the bottom of
Hopper Assembly.
2.
Aligning all the six holes around Hopper Assembly and the six holes on the Frame by using six Hex Bolts
M6x50, Big Flat Washer Ø 6 on the top and six Nylon Lock Nuts M6. Adjust parts of the Hoper Assembly to
make the axle to be able to twirl freely and then screw all the Nylon Nut M6.
3.
Insert the R Pin Ø3x75 into the hole on top of Swivel Axle.