Page 3
3. ASSEMBLY INSTRUCTIONS
Assembly Step
1. As per Pic. 1, assemble a Flat Washer Ø12, a Bushing, a Poly Wheel on one end of the wheel
axle, which as a Ø3 hole. Then go on assembling a Flat Washer Ø12, at this moment, please
insert a Cotter Pin Ø3X30 into the Ø3 hole on the wheel axle and make the cotter bent for locking.
2. Assemble a Flat Washer Ø12, a Bushing, a Poly Wheel at the other end of the wheel axle.
Turn the wheel till the Ø5 hole on the wheel is in the same line with the Ø5 hole on the wheel
axle, insert the Cotter Pin Ø5X45 and make it bent for locking.
