- 11 -
STEP 5: Assemble the Handle Assembly
1. Attach the height adjustment handle to the height adjustment tube using two M8x40 hex bolts
and M8 lock nut. Loosely tighten.
2.
Insert a M8x20 hex bolt through the angle bracket. In the following order put the spacer
bushing, height adjustment strap, Ø8 big flat washer and M8 lock nut and tighten.
STEP 6:
Attach Connecting Rod
1. Attach the connecting rod to the sweeper housing using two sets of M6x12 hex bolts and M6
lock nut.
STEP 7:
Assemble Hopper Bag
1. Position the rear hopper tube so the brace holes are in the middle and the tube is facing down.
2. Side the tube through the two sewn in loops at the top of the rear seam inside the bag.