Page
4
of
6
Hardware required
Sketch
QTY
(B)- Side Handle
(2)
(C)- Small Bolt
(8)
Tools required for assembly:
Wrench
Handle Assembly Instructions
1
Unpack the unit and confirm that you have all the hardware and required parts listed.
2
Stand the unit upright and attach Side Handle (B) to Tool Chest (A) securing with Small Bolts (C) as
shown below figure.
3
Repeat step for the other side handle.
Note: Assemble the unit on a sturdy and level surface. Avoid assembling on carpet. You should place the
unit on a protective surface when assembling to the unit to prevent scratching or damage to any of the
surfaces.
Caster Assembly Instructions
