Important saFetY
InFormatIon
assembly precautions
Assemble only according to these instruc-
1.
tions. Improper assembly can create haz-
ards.
Wear ANSI-approved safety goggles and
2.
heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.
3.
Keep bystanders out of the area during as-
4.
sembly.
Do not assemble when tired or when under
5.
the influence of drugs or medication.
use precautions
This product is not a toy. Do not allow chil-
1.
dren to play with or near this item.
Keep work area clean and well lit. Cluttered
2.
or dark areas invite accidents.
People with pacemakers should consult their
3.
physician(s) before use. Electromagnetic
fields in close proximity to heart pacemaker
could cause pacemaker interference or pace-
maker failure.
The Sweeper contains a strong magnetic pull
4.
capacity and should not be used around ma-
terials and components that can be damaged
when exposed to a magnet.
Use for intended purpose only.
5.
Dress properly. Do not wear loose cloth-
6.
ing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
Inspect before use; do not use if parts loose
7.
or damaged.
Maintain product labels and nameplates.
8.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
read the entIre Important
saFetY InFormatIon section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
assembly
Figure 1
Magnet
Housing (1)
Handle
Base (5)
Sweeper
Handle (3)
Pan Head
Bolt (7)
Housing
Handle (6)
1.
Insert Sweeper Handle (3) into Handle Base
(5) and secure with Pan Head Bolt (7). See
Figure 1
, above.
operatIon
Sweeper
Handle (1)
Wing Nut
Figure 2
1.
Adjust the Sweeper Handle (3) to the desired
height by unscrewing Wing Nut and sliding
handle tube up or down-see
Figure 2
, above.
The Handle telescopes from 30” to 44” when
extended.
When the desired height is reached, tighten
2.
the Wing Nut into place.
While holding the handle, roll the Magnetic
3.
Sweeper across the desired floor area such
as a workshop, garage, warehouse, etc. The
Magnetic Sweeper will pick up metal objects
such as nails, pins, bolts, screws and metal
shavings.
