5
a) Place leading plate (38) to the main platform (1) by bolts and nuts.
b) Fit the front wheel vice assembly (4) to the front of the platform.
c) Fit the fender (30) using hex bolt (28)
d) Attach the fixing vise (3) and movable vise (2) by nuts and screws
5. OPERATING INSTRUCTIONS
• Position the lift in a suitable level place, checking that the surface on which the
lift will stand is solid and flat.
• Put safety handle (33) in place before use.
• Wheel the motorcycle up the leading plate and onto the platform.
• Clamp front wheel in vice to prevent any movement of the motorcycle.
• Strap the motorcycle securely to the platform.
• Raise the lift by pumping the foot pedal (8).
• When work is done, check under the lift to ensure that there are no
obstructions and that it is safe to lower the unit.
• When the lift is fully lowered, unstrap the motorcycle, open the vice jaws and
remove the cycle from the lift.
6. MAINTENANCE
• When not in use, the lift must be stored in the lowest position in a dry location
to minimize ram and piston corrosion.
• Keep the lift clean and wipe off any oil or grease, lubricate all moving parts.
• Periodically check the ram and piston for signs of corrosion. Clean exposed
areas with a clean oiled cloth.
• Before each use check all parts. If any part of the lift is damaged or suspect,
remove the lift from service and take necessary action to repair.
