6
Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for safe and effective
operation of this product. This product has unique features and, even if you are familiar with similar products,
it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all users of
the tool read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Toxic fumes or gases!
DO NOT use in rain or damp environments!
Important safety devices! Ensure correct function, maintain in accordance with instructions and
DO NOT disable!
Dust extraction required or recommended
LASER warning!
Caution!
Class II construction (double insulated for additional protection)
WARNING: Moving parts can cause crush and cut injuries.
Be aware of kickback!
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice.
Conforms to relevant legislation and safety standards.
Model no:
CT1503
Voltage:
220-240V~ 50Hz
Power:
S1 1600W S6 25% 2000W
No load speed:
4800/min
Max depth of cut:
78mm
Max blade size:
Ø255mm
Bore:
30mm
Supplied blade:
Ø255mm x Ø30mm x 2.8mm x 60T
Mitre table angles:
0° to 45° left & right (0, 15, 22.5, 30 & 45° click stops)
Bevel cuts:
0° to 45° left & right
Straight cut: 0° mitre x 0° bevel
305 x 78mm
Mitre cut: 45° (L&R) x 0°
210 x 78mm
Bevel cut: 0° mitre x bevel (L) 45°
305 x 42mm
Bevel cut: 0° mitre x bevel (R) 45°
210 x 42mm
Compound cut: 45° bevel (L) x mitre 45° (R or L)
210 x 42mm
Compound cut: 45° bevel (R) x mitre 45° (R or L)
210 x 23mm
Ingress protection:
IP20
Laser Class:
II
Laser Wavelength:
650nm
Laser Output power:
≤1mW
Power cord length:
2 m
Protection class:
Weight:
15.5kg
As part of our ongofing product deveflopment, specfificatfions of NEILSEN products may aflter wfithout notfice.
Specification
Technical Abbreviations Key
Original Instructions
V
Volts
~, AC
Alternating current
A, mA
Ampere, milli-Amp
n
0
No load speed
n
Rated speed
λ
Wavelength
°
Degrees
Ø
Diameter
Hz
Hertz
, DC
Direct current
W, kW
Watt, kilowatt
/min or min
-1
Operations per minute
rpm
Revolutions per minute
nm
Nanometre
dB(A)
Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration magnitude)
