7.1
Mounting saw blade
Loosen your screws and open the top of the base plate
Press the spindle lock and turn the spindle until it engages in the lock.
Keep the
spindle
lock pressed during this procedure.
Remove the flange nut from the spindle using the wrench.
Position the saw blade and the flange.
Place the flange nut from the spindle and tighten it with the wrench.
Take care that the flange nut will be placed with the correct aide on the
spindle.
Release the spindle lock and check that the spindle is unlocked by
rotating it.
Close the top of the base plate and fasten four screws.
Make sure that the top of the base plate is securely closed before
operating the machine.
7.2
Mounting dust bag
For dust extraction the dust bag can be used. Insert the dust bag into the
vacuuming connection. Empty the dusts bag regularly so that the vacuuming
performance remains intact.
7.3
Attaching the plate protection
The plate protection needs to be attached to the angle stop prior to use. For
easier assembly, set the angle stop into the 90° position. Slide the plate
protection onto the angle stop with the plastic locating arms positioned over the
top, and the plastic face being located underneath.
8. OPERATION
8.1
Switching on and off.
Never use the spindle lock until the machine is working.
To switch the machine on push the lock-off button and the on/off switch
trigger at the same time.
To switch the machine off, release the on/off switch trigger.
