![background image](http://html1.mh-extra.com/html/neilsen/ct0902/ct0902_original-instructions_3881525002.webp)
2
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Ensure roller support stand is set up on firm, level
ground in a stable manner.
3. Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4. Be aware of over-balancing. When a large piece is cut from one end of a job, the
remaining piece may be heavy enough to tip the stander. Always ensure the workpiece
is well supported.
5. Use the right tool for the job. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
8. Work Safe. Keep proper footing and balance at all times. Never use support stand as
step ladder, nor stand on support stand top. Never exceed recommended maximum
weight capacity of support stand (132 lbs.). Always lower heavy loads onto stand gently,
so that strain is taken up gradually.
9. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
10. Check to make sure that all fixing screws and knobs are tight and all legs are locked
into place before operating the stand.
11. Check damaged parts. Before further use of tool, it should be carefully checked to
determine that it will operate properly and perform its intended function.
12. Do not operate any tool if under the influence of alcohol or drugs. Read warning labels
on prescriptions to determine if your judgment or reflexes are impaired while taking
drugs. If there is any doubt, do not operate any tool.
13. When not in use, tools should be stored in a dry locked-up place, out of the reach of
children and persons unfamiliar with the tool.
Adjustable
Height:
680-1100mm
Roller
Size
:
290mm (L) X 48mm(Dia.)
Weight Capacity:
60Kg