DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for recycling advice.
ASSEMBLY
1.
Place the Top Tray
(6)
upside down on a flat surface.
2.
Position one of the I-Beam Frame Legs
(3)
on the
inside of the Top Tray.
NOTE:
The eyelets on located on the I-Beam should be
facing inwards, with the larger circle facing downwards.
3.
Use a Large Machine Screw
(7)
and Hex Nut
(8)
to
fasten the I-Beam Frame Legs to the Top Tray on both
sides.
4.
Place the Base
(1)
on the opposite end of the
I-Beams, aligning the holes on the I-Beam with the
holes on the Base using the Large Machine Screws
(7)
.
5.
Place the Bottom Bin Support Rail
(4)
on the bottom
set of holes located on the I-Beams.
6.
Align the holes in the Base Support Brackets
(2)
with
the threaded holes on the Base
(1)
, and the holes of
the I-Beams. Fasten the top and bottom holes with two
Large Machine Screws
(7)
.
7.
Insert the remaining Bin Support Rails
(4)
on to the
I-Beams. Make sure the 3 holes in the support rails are
closer to the top.
8.
Align the Vertical Support Bracket
(5)
on the back
of the Bin Support Rails, and secure into place with the
Small Machine Screws
(9)
.
CONTENTS
1.
Base
2.
Base Support Brackets
x2
3.
I-Beam Frame Legs
x2
4.
Bin Support Rail
x7
5.
Vertical Support Bracket
x3
6.
Top Tray
7.
Large Machine Screws
x20
8.
Hex Nuts
x8
9.
Small Machine Screws
x21
7
6
4
5
3
3
1
2
7
9
8