![background image](http://html1.mh-extra.com/html/neilsen/ct0698/ct0698_original-instructions-manual_3893404005.webp)
4
repaired.
d.Disconnect the tool from the air source before making any adjust-
ments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the Air Angle Die Grinder
unintentionally. Turn off and detach the air supply, safely discharge any
residual air pressure, and release the throttle and/or turn the switch to its
off position before leaving the work area.
e.Store the Air Angle Die Grindere. when it is idle out of reach of chil-
dren and other untrained persons. A die grinder is dangerous in the hands
of untrained users.
f.Maintain the tool with care. A properly maintained tool is easier to
control.
g.Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that affects the tool’s operation. If
damaged, have the Air Angle Die Grinder serviced before using. Many
accidents are caused by poorly maintained tools. There is a risk of burst-
ing if the tool is damaged.
h.Use only accessories that are identified by the manufacturer for the
specific tool model. Use of an accessory not intended for use with the
specific tool model, increases the risk of injury to persons.
6. Service
a. only by qualified repair personnel.
b.When servicing the Air Angle Die Grinder, use only identical
replacement parts. Use only authorized parts.
c.Use only the lubricants supplied with the tool or specified by the
manufacturer.
7.Air source