3
•
DO NOT hold the workpiece by hand. Use clamps or a vice to secure the
workpiece.
•
DO NOT use the tool for a task it is not designed to perform.
•
WARNING! DO NOT use tool if damaged or faulty. Contact your local service
agent.
•
DO NOT use tool unless you have been instructed in its use by a qualified
person.
•
DO NOT position your body in line with the disc whilst cutting, and DO NOT
remove the safety guard whilst in use.
•
DO NOT carry the tool by the air hose, or yank the hose from the air supply.
•
DO NOT direct air from the air hose at yourself or others.
•
WARNING! DO NOT cut any materials containing asbestos.
•
DO NOT switch the tool on whilst the disc is in contact with the workpiece.
•
DO NOT allow workpiece to overheat. Periodically cool by immersing the
workpiece in water.
•
DO NOT use tool where there are flammable liquids, solids or gases such as
paint solvents including waste wiping or cleaning rags etc as any sparks
generated may be dangerous.
•
DO NOT touch the workpiece close to the ground surface as it will be very hot.
Allow to cool.The workpiece may also be very sharp.
•
DO NOT operate tool if you are tired or under the influence of alcohol, drugs or
intoxicating medication. When not in use disconnect from air supply and store in
a safe, dry, childproof location.
2.INSTRUCTION & SPECIFICATION
The tools feature contoured, soft-grip handles and housings which help reduce
the effects of vibration and
chill – major contributors to circulatory and nerve problems such as white finger.
The tools also include exhaust systems designed to reduce noise levels by
baffling the noise or directing it away from the operator’s environment. Most of the
tools include integral and adjustable air valves for precise control of output. The
air wrenches are pound for pound, amongst the most powerful machines we have
seen in the market and the materials and manufacturing techniques used in the
production of all these series will ensure long and reliable service
Air consumption: . . . . . . . . . . . . . . . . . . . .5.5cfm
Max. Operating pressure: . . . . . . . . . . . . . 6.2bar
Air inlet : . . . . . . . . . . . . . . . . . . . . 1/4”
Max. speed: . . . . . . . . . . . . . . . . . . . .20000/min
