6
Step 5: Select the power setting for Loosening by adjusting the AIR REGULATOR (#36)
located on the bottom of the Impact Wrench as shown in Figure 3. When the Air
Regulator is completely screwed in it is at it’s lowest setting. Air pressure increases as
you loosen the Air Regulator.
CAUTION:
Use the Setting Appropriate for the
Job. Do Not Set the Power Setting
Higher Than
Needed. Damage to
Parts Could Result.
Figure .3
–
Adjusting the Reverse Power Setting
Step 6: Select the direction of the Wrench (forward or reverse) by pushing the REVERSE
VALVE (#42) located on the handle of the Impact Wrench as shown in Figure 4.
Figure 4
— Selecting Reverse Direction, Pressing Trigger
Step 7: Press the TRIGGER (#31) to test the Impact Wrench. The Impact Wrench should spin
freely as shown if Figure 4.
