6
MAINTENANCE
WARNING!
Ensure you disconnect the tool from the air supply system before attempting any
service or maintenance.
1. Maintain the tool with care. Keep it oiled for optimum performance.
2. Lubricate the air tool daily with a high quality air tool oil either via an oiler in the air supply
system or by placing a few drops into the riveter air inlet immediately before use.
3. Store the tool in a safe, dry, secure environment.
4. Factors that may inhibit performance:
Loss of power or erratic action may be caused by reduced compressor output, an excessive
drain on the air line, moisture or restrictions in air pipes or the use of hose connections of
incorrect size. Grit or gum deposits in the tool may cut power and can be corrected by
flushing out the tool with gum solvent oil or an equivalent de-greaser. If all external conditions
are in order, disconnect the tool from the air supply, disassemble and replace any worn or
damaged parts with original parts. Clean all parts, reassemble and lubricate.
Alternatively, take the tool to your nearest authorised service agent.
