NEFF W544BX1GB, User Manual And Assembly Instructions

Page: 42 / 68

en
Basic operation
42
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
1.
Press
Start / Reload
.
2.
Press
Finished in
repeatedly until
the display indicates the desired
"Ready in" time.
3.
Press
Start / Reload
.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start / Re-
load
.
3.
To resume the programme, after
the desired soaking time, press
Start / Reload
.
Adding laundry
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
1.
Press
Start / Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start / Reload
.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
1.
Press
Start / Reload
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high: Start
the
Spin
or
Drain
programme.
3.
Remove the laundry.
Resuming the programme
when the programme status
is Rinse Hold
1.
Set the
Spin
or
Drain
programme.
2.
Press
Start / Reload
.
Unloading the laundry
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
1.
Open the door.