NEFF V6320X1GB, Instruction Manual And Installation Instructions

Page: 14 / 36

14
Special programmes
Fluff removal cycle
The drum must be empty.
This programme is designed to clean the drying cycle of any fluff
deposits. The washer-dryer uses the flashing symbol
l
(
Fluff removal
cycle
) in the display panel to show that this programme must be run. The
electronic cycle counter is then automatically reset. The
l
Fluff removal
cycle
symbol goes out after the programme starts.
To run the
Fluff removal cycle
programme, proceed as follows:

Make sure that the drum is completely empty and close the door.

Set the programme selector to
Fluff removal cycle
.

Press the
Start/Pause
button.
You can also run the
Fluff removal cycle
programme at any time without
prompting from the appliance.
Rinse + Spin
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the spin speed to
$
(Rinse stop) before starting the
programme → page 15.
Drain + Spin
:
Drain the rinsing water following a programme with
$
(Rinse stop)
→ page 15.

Turn the programme selector to
Drain + Spin
.

Set the spin speed to
$
(Rinse stop).

Press the
Start
/Pause button.
or
Drain
and
spin at the desired spin speed:

Turn the programme selector to
Drain + Spin.

Press the
Spin
button repeatedly until the desired spin speed is set.

Press the
Start/Pause
button.
i
i